Rebuilt Heidelberg Windmill Die Cutter / Foil Stamper
Pressworks MAXimum offers the completely rebuilt Heidelberg Windmill in either 10 x 15 or 13 x 18 sizes. These machines are completely disassembled and inspected for worn or damaged parts prior to being repainted. After the machine has been repainted, all worn or defective parts are replaced, the machines are reassembled to factory specifications, and finally, tested for proper operation. At Pressworks MAXimum, we take great pride in the quality of our work, as well as, the appearance and operation of our machines.
Pressworks MAXimum also offers a large capacity foil unit available for either size Windmill. This unit is available with one, two, or three independent draw motors. It also comes with a removable face plate, which allows for quick and easy die placement and setup, as well as, allowing one job to run while another job, die cutting or foil stamping, is being setup. The foil unit control system is digital and allows you to control main drive function, heat plate temperature, and foil draw and skip times. Micro-tune adjustment knobs are also available to fine tune the draw and skip times while running, which allows you to reduce foil waste. These units utilize existing holes in the Windmill for mounting, making it simple to install at the factory or in the field. Each unit comes with an installation and operation manual, a training video, and a one year warranty.
Specifications
10 x 15 26 x 38 cm |
13 x 18 |
|
---|---|---|
Maximum Sheet Size | 10 1/4” x 15” 26 x 38 cm |
13 3/8” x 18 1/8” 34 x 36 cm |
Minimum Sheet Size | 1 1/2” x 2 3/4” 4 x 7 cm |
3 1/2” x 4” 8,5 x 10,2 cm |
Minimum Sheet Size, Two-up |
1 1/2" x 2 2/3” |
3 1/2” x 4” 8,5 x 10,2 cm |
Maximum Width of Half Sheet |
5" |
6 5/8" |
Inside Chase Measurement | 10 1/4” x 13 3/8” 26 x 34 cm |
12 5/8” x 17 3/4” 32 x 45 cm |
Maximum Speed | 5500 iph | 4000 iph |
Power Requirements | 1.25 KW = 1.7 HP | 1.9 KW = 2.5 HP |
Net Weight | Approx 2300 lbs | Approx 4950 lbs |
Gross Weight | Approx 2850 lbs | Approx 5500 lbs |
Width (facing machine) | 4' 1" 1.24 m |
4' 10" |
Depth (including motor) | 5' 6" 1.68 m |
6' 10" 2.08 m |