Rebuilt Heidelberg ‘S’ Series Cylinder Die Cutter
Pressworks MAXimum Machinery selects the very best available Heidelberg Cylinder letterpresses and completely strips and cleans them. We then carefully inspect all the mechanical components and replace worn or damaged pieces. The bed is reground to accept 0.918 and 0.937 dies.
- The electrical system is completely upgraded with modern controls and the motor is serviced.
- The machine is repainted and reassembled
- A new guard package, including safety devices, is installed along with a new die jacket.
You must install Adobe Flash to view this content.
Specifications
| Heidelberg S | Heidelberg SBG | Heidelberg SBB | Heidelberg SBD | |
|---|---|---|---|---|
| Maximum Sheet Size | 21-1/4" x 28-3/8" | 22-1/2" x 30-1/4" | 22-1/2" x 32-1/4" | 25-1/4" x 35" |
| Minimum Sheet Size | 4-1/2" x 6-3/8" | 11-7/16" x 15-3/4" | 11-7/16" x 15-3/4" | 11-7/16" x 15-3/4" |
| Inside Chase Measurements | ||||
| Standard Chase | 21-1/16" x 26-7/16" | 22-1/16" x 28-3/8" | 22-1/16" x 30-3/8" | 25-1/4" x 33-7/16" |
| Skeleton Chase | 21-1/16" x 27-3/16" | 22-1/16" x 29-1/8" | 22-1/16" x 31-3/16" | 25-1/4" x 34-1/4" |
| Max Form In Std. Chase | 20-1/4" x 26-3/8" | 21-1/4" x 28-3/8" | 21-1/4" x 30-3/8" | 24-3/8" x 33-7/16" |
| Max Form Between Bearers | 20-1/4" x 27-3/16" | 21-1/4" x 29-1/8" | 21-1/4" x 31-3/16" | 24-3/8" x 34-1/4" |
| Gripper Margin | 5/16" and 3/8" | 5/16" x 3/8" | 5/16" and 3/8" | 5/16" and 3/8" |
| Maximum Speed | 4,000 iph | 4,600 iph | 4,600 iph | 4,000 iph |
| Power Requirements | 240v 3 phase, 40 amp | 240v 3 phase, 40 amp | 240v 3 phase, 40 amp | 240v 3 phase, 40 amp |
| Net Weight | 10,950 lbs | 11,700 lbs | 12,125 lbs | 13,224 lbs |
| Gross Weight | 13,500 lbs | 14,600 lbs | 15,000 lbs | 16,124 lbs |
| Overall Length | 11' 2-1/4" | 11' 6" | 11' 6" | 12' 11/16" |
| Overall Width | 6' 3" | 6' 7" | 6' 7" | 8' 7/16" |
| Height To Top Of Feeder | 4' 9-1/8" | 5'1" | 5' 1" | 4' 11" |
